Robotics

The Arduino Uno DIP is a versatile and beginner-friendly microcontroller development board based on the ATmega328P (removable DIP package). It is ideal for electronics projects, robotics, IoT applications, automation systems, and educational use.

BB400 Breadboard – 400 Tie Points Solderless Prototyping Board

Arduino Nano CH340 Compatible (Unsoldered) is a compact ATmega328P-based microcontroller board designed for embedded, robotics, and IoT projects. 

Arduino Mega 2560 is a powerful ATmega2560-based microcontroller board designed for complex projects requiring more I/O pins and memory. With 54 digital I/O pins, 16 analog inputs, and 256KB flash memory, it is ideal for robotics, automation, 3D printers, and advanced embedded applications. Perfect for students, hobbyists, and professionals.

ESP32 is a powerful WiFi + Bluetooth dual-core microcontroller ideal for IoT, automation, and smart device projects. With built-in wireless connectivity, multiple GPIO pins, ADC/DAC support, and high processing speed, it is perfect for advanced embedded applications and wireless development.

ESP8266 is a compact and cost-effective WiFi microcontroller module ideal for IoT and smart automation projects. With built-in WiFi and TCP/IP support, it enables seamless wireless connectivity for embedded systems, home automation, and remote monitoring applications.

Male to Female Jumper Wires are high-quality connection cables designed for easy interfacing between breadboards, Arduino, Raspberry Pi, sensors, and modules. Perfect for prototyping and circuit testing without soldering.

Female to Female Jumper Wires are flexible connector cables with socket ends on both sides, ideal for connecting header pins on Arduino, Raspberry Pi, sensors, and modules. Perfect for solderless prototyping and circuit development.

XL6009 DC-DC Boost Converter Module is a high-efficiency step-up power supply module designed to increase DC voltage levels. Ideal for battery-powered projects, LED drivers, and DIY electronics, it offers adjustable output voltage with stable performance.

LM2596 DC-DC Buck Converter Module is a high-efficiency step-down voltage regulator designed to reduce higher DC voltage to a lower adjustable output. Ideal for Arduino, battery projects, LED drivers, and DIY power supply applications.

TP4056 Module with Protection is a 1A lithium battery charging module designed for 3.7V Li-ion and LiPo batteries. It features built-in overcharge, over-discharge, and short-circuit protection, making it ideal for safe and reliable battery charging in DIY and IoT projects.

L298N Motor Driver Module is a high-power dual H-Bridge driver designed to control DC motors and stepper motors. Ideal for robotics and automation projects, it supports up to 2A per channel and works perfectly with Arduino, ESP32, and other microcontrollers.

PIR Motion Sensor Module is a passive infrared sensor used to detect human motion by sensing body heat. Ideal for security systems, automatic lighting, and Arduino-based projects, it offers adjustable sensitivity and delay time for reliable motion detection.

Ultrasonic Sensor Module is a high-precision distance measuring sensor designed to detect objects using ultrasonic sound waves. Ideal for Arduino, robotics, and automation projects, it provides accurate non-contact distance measurement up to 4 meters.

IR Sensor Module is an infrared-based proximity detection sensor used to detect obstacles and nearby objects. Ideal for robotics, line follower, and automation projects, it provides fast and reliable object detection with adjustable sensitivity.

Flame Sensor Module is an infrared-based fire detection sensor designed to detect flame or fire sources. Ideal for Arduino, robotics, and safety projects, it provides both digital and analog output with adjustable sensitivity.

SG90 Micro Servo Motor is a compact and lightweight servo widely used in robotics, RC vehicles, and DIY electronics projects. It provides precise position control (0–180°) and operates on 4.8–6V, making it perfect for Arduino, Raspberry Pi, and small robot mechanisms.

MG90S Metal Gear Micro Servo Motor is a compact and durable servo designed for robotics, RC models, and automation projects. With high torque and metal gears, it provides precise 0–180° position control and operates on 4.8–6V, making it ideal for Arduino, Raspberry Pi, and robotic applications.

3.7V Coreless Motor with Propeller (7×16) is a lightweight high-speed DC motor commonly used in mini drones, DIY flying toys, robotics, and small electronic projects. It operates efficiently on 3.7V Li-Po batteries and comes with a compatible propeller for easy installation.

Smart Robot Car Chassis Kit (2 Wheel) is a complete DIY robotic car platform designed for Arduino, robotics learning, and automation projects. It includes a durable chassis, 2 DC motors, wheels, and mounting hardware, making it perfect for building smart robot cars and obstacle-avoidance robots.

Smart Robot Car Chassis Kit (4 Wheel) is a durable DIY robotics platform designed for Arduino, Raspberry Pi, and robotics learning projects. It includes 4 DC geared motors, wheels, chassis, and mounting accessories, making it ideal for building powerful and stable robot cars.

DC Geared RPM Motor (30 / 60 / 100 / 200 / 500 RPM) is a durable and high-torque motor designed for robotics, smart car projects, and automation systems. Available in multiple speed options, it provides stable performance and strong torque, making it ideal for Arduino and DIY robotics applications.

MQ2 Gas Sensor Module is a widely used sensor for detecting LPG, propane, methane, hydrogen, and smoke. It is ideal for gas leakage detection, safety systems, and Arduino-based environmental monitoring projects.

MQ3 Alcohol Sensor Module is a gas sensor designed to detect alcohol vapors in the air. It is commonly used in breath analyzer devices, alcohol detection systems, and Arduino-based sensor projects.

MQ4 Gas Sensor Module is designed to detect methane (CH₄) and natural gas in the air. It is widely used in gas leakage detection systems, safety monitoring, and Arduino-based environmental sensing projects.

MQ6 Gas Sensor Module is designed to detect LPG, propane, and butane gases in the air. It is commonly used in gas leakage detection systems, safety alarms, and Arduino-based monitoring projects.

MQ7 Gas Sensor Module is designed to detect Carbon Monoxide (CO) gas in the air. It is widely used in gas monitoring systems, safety alarms, and Arduino-based environmental sensing projects.

MQ8 Gas Sensor Module is designed to detect Hydrogen (H₂) gas in the air. It is commonly used in gas leakage detection systems, safety monitoring, and Arduino-based electronics projects.

MQ135 Gas Sensor Module is an air quality sensor designed to detect NH3, NOx, alcohol, benzene, smoke, and CO2. It is widely used in air quality monitoring systems, pollution detection, and Arduino-based environmental projects.

DHT22 Temperature and Humidity Sensor is a high-accuracy digital sensor used to measure temperature and relative humidity. It is ideal for Arduino, Raspberry Pi, IoT, and environmental monitoring projects.

DHT11 Temperature and Humidity Sensor is a basic digital sensor used to measure temperature and relative humidity. It is widely used in Arduino, Raspberry Pi, IoT, and beginner electronics projects.

LM35 Temperature Sensor is a precision analog sensor used to measure temperature in Celsius. It provides linear voltage output proportional to temperature and is widely used in Arduino, Raspberry Pi, and electronics projects.

DC Water Pump Motor is a compact and efficient pump designed for water transfer, circulation, and DIY automation projects. It operates on low DC voltage, making it ideal for Arduino, robotics, aquariums, and automatic watering systems.

Soil Moisture Sensor Module is designed to measure the moisture level in soil, making it ideal for automatic plant watering systems, smart irrigation, and Arduino-based agriculture projects.

Rain Drop Sensor Module is used to detect rainfall or water droplets. It is commonly used in weather monitoring systems, automatic wipers, smart irrigation, and Arduino-based IoT projects.

LDR Sensor Module is a light-sensitive sensor used to detect light intensity levels. It is commonly used in automatic lighting systems, Arduino projects, and smart home automation applications.

NEO-6M GPS Module is a high-performance satellite positioning module used to determine location, speed, and time. It is widely used in Arduino, Raspberry Pi, IoT tracking, and navigation projects.

The HC-05 Bluetooth Module is a widely used wireless communication module designed for serial data transmission. It allows microcontrollers such as Arduino, Raspberry Pi, and other embedded systems to communicate with smartphones, tablets, or other Bluetooth-enabled devices. The module supports both Master and Slave modes, making it flexible for various IoT and robotics applications.

The RFID Module (RC522) is a contactless communication module used for reading and writing RFID cards and tags. It operates at 13.56 MHz and is widely used in applications like access control systems, attendance systems, and security authentication projects with microcontrollers such as Arduino and Raspberry Pi.

The RFID Card is a contactless smart card used for identification and authentication in RFID systems. It works with 13.56 MHz RFID readers such as the RC522 module and is commonly used in access control, attendance systems, and security applications.

The SIM800L GSM/GPRS Module is a compact cellular communication module that enables microcontrollers to send SMS, make calls, and connect to the internet using a SIM card. It is widely used in IoT, GPS tracking, and remote monitoring projects.

The I2C Module for LCD (I2C Interface Adapter) is a small interface board that allows LCD displays such as the 16x2 or 20x4 LCD to communicate using the I2C protocol. It reduces the number of required microcontroller pins and simplifies wiring, making it ideal for Arduino and other embedded projects.

The 16×2 LCD with I2C Module is a character display module capable of showing 16 characters per line across 2 lines. With the integrated I2C interface, it requires only two communication pins (SDA and SCL), making it easy to connect with Arduino, Raspberry Pi, ESP8266, and other microcontrollers.

The Joystick Module is an input device used to control movement in two directions (X and Y axes) along with a push-button switch. It is commonly used with microcontrollers like Arduino, Raspberry Pi, and ESP boards for robotics, gaming controls, and navigation in embedded systems.

The USB Type-C Cable is a modern, reversible USB cable designed for fast charging and high-speed data transfer. It is widely used with smartphones, tablets, laptops, and development boards that support USB-C connectivity.

The V8 Cable (Micro USB Cable) is a commonly used cable for charging and data transfer in devices with a Micro USB port. It is widely used with smartphones, microcontroller boards, power banks, and other electronic devices.

The UNO Cable (USB A to USB B Cable) is used to connect development boards such as the Arduino UNO to a computer for programming, data communication, and power supply. It provides reliable USB connectivity for electronics and embedded projects.

The 9V Battery is a compact and reliable power source commonly used in electronics projects, microcontroller circuits, sensors, and portable devices. It provides stable 9-volt DC power, making it suitable for prototyping and small electronic applications.

The 9V Battery Snap Connector is a simple connector used to easily connect a 9V battery to electronic circuits and devices. It features snap terminals that attach securely to the battery and two wires for convenient circuit connection.

The 18650 Lithium-Ion Battery is a rechargeable high-capacity battery commonly used in electronics, power banks, flashlights, and DIY projects. It provides stable 3.7V power output and is ideal for portable devices and energy storage applications.

The 3 Cell Battery Holder (18650) is designed to securely hold three 18650 lithium-ion batteries and provide a convenient power output connection for electronic circuits, robotics, and DIY electronics projects.

The 1 Cell 18650 Battery Holder is designed to securely hold a single 18650 lithium-ion battery and provide a convenient power output for electronics projects, DIY devices, and prototyping circuits.

The Humidifier Module (Ultrasonic Mist Maker) is an electronic module used to generate fine water mist using ultrasonic vibration. It is commonly used in DIY humidifiers, air moisture control systems, and smart home or IoT projects.